Jump to content
Datsun510.com

8-Installed Starter and Shortened Bellhousing Bolt


Dave Patten
 Share


The SR starter has threads in the nose housing at the bolt holes and the starter in held to the SR engine by bolts that pass thru the original FWD bellhousing into the starter. To install the starter using the adapter you will need to drill out the threads in the starter and install M10 x 1.5 bolts thru the starter into tapped holes in the adapter just like the L series starter installs. Use 14mm head bolts; otherwise the 17mm hardware store specials will not allow a socket onto the head, which will be needed for the installation. All bolts will need to be shortened to not protrude past the adapter plate. See how the end of transmission bolt from the other side is flush.

From the album:

SR16VE to L Transmission Adapter

· 11 images
  • 11 images
  • 0 comments

 Share

×
×
  • Create New...