datsun5101973
-
Posts
100 -
Joined
-
Last visited
Never
Content Type
Profiles
Gallery
Everything posted by datsun5101973
-
Trailing Arm 25.5 pounds -
-
-
4 new caps -
Super clean There are 5 wheels with polished lip. Offset for clearance works on stock 510. -
-
Brand -
In this photo you see the back side of both. -
Also the black gromet on the Series tach has only two holes for two wires to exit through. The late tach has 4 holes with three being used. -
Insisde under the tape you see resistors etc. etc, This makes them on the backside of the board. -
A tan tape covers where the white wires come out of the early tach. It's a sticker the same shape as the opening. It's curved at the bottom. -
From the rear you see the board solder side. on the oppisite side are the electrical items (capacitors etc etc) -
This is a late model tach. Does not have large White wires of the Series style tach. I would appreciate any wiring info for stock and any other non-stock ignition aplications. -
Black # 88 finished 7th -
-
Note BLUEBIRD & cartoon 510 on dials -
Stock 510 brakes -
Stock brakes required by SCCA -
preparing for polishing -
preparing for polishing -
preparing for polishing -
Without the rotor & hubs. -
photographed indoors with Sony P1 @ 400 speed speed setting no flash. I set lugs in place. -
Kelvin? -
Not ultra -light